Default Setting Menu - Toshiba TLP-ET1E Owner's Manual

Default setting menu

Use this menu to make settings such as the placement style (projection mode).
e.g.
Menu Enter
Default setting
Keystone
Screen size
Up/down shift
Lamp power
Projection mode 1
Projection mode 2 Standard
Language English
NTSC mode
All reset
Lamp time reset
Item
Keystone Correct the keystone (trapezoid) distortion of the screen.
Screen size Set the screen size mode.
1) Press the OK button.
2) Select one from the displayed list with
("Theater wide" and "Zoom" cannot be selected when the input is COMPUTER.)
This item can also be set with the SIZE button on the remote control. (See
Up/down shift Scroll the screen up or down, for example, when subtitles are outside the picture area.
(Adjustable only when the screen size is "Zoom".)
Lamp power Select lamp power with
Projection mode 1 Select projection mode 1 with
Projection mode 2 Select projection mode 2 with
Language Select the language for on-screen menus and messages.
1) Press the OK button.
2) Select one from the displayed list with
NTSC mode Set with
All reset Reset all of the adjustment and setting items to the defaults.
1) Press the OK button.
2) In the dialog box displayed, use
Lamp time reset Reset the lamp timer. (See
Note
• Pressing the EXIT button on the remote control dismisses the menu screen.
Press the MENU button.
Exit
Use the
default setting menu icon [
0
press the
Zoom
0
Use the
Low
Front
item you want to set, then set it
according to the table shown below.
Remote control
US
Shrinking lower part
Full/Theater wide/4:3/Zoom
Down
and
Standard (floor-mounted)/Ceiling
English/Français/Deutsch/Italiano/Español/Português/
and .
US : NTSC (US) mode
JAPAN: NTSC (JAPAN) mode
press the OK button.
p.44)
and buttons to select the
button.
and buttons to select an
Control panel
Description
Shrinking upper part
and , then press the OK button.
Up
.
Standard/Low
and , according to the projector's placement style.
Front/Rear
and , according to the projector's placement style.
and , then press the OK button.
or to select whether to execute this function, then
], then
p.25.)
35