System Information; Calibration; Tv Section(Only For Pd-930T/Pd-930Bt) - Power Acoustik KSD9100 Owner's Manual

Three screen ratio modes are available, Normal/PS (4:3 Pan Scan), Normal/LB (4:3 Letter Box)
and Wide (16:9). Different disc formats will display different images depending this setting and
the screen size used.
[8] NTSC/ PAL:
Select this menu item to set up your preferred video output format. PAL is commonly used in
Europe. NTSC is commonly used in the USA and Japan. Auto is commonly used.
[9] DEFAULT:
Factory reset. Set all values to Factory default values
including memory and preset stations.

SYSTEM INFORMATION

Press SYSTEM button to show the information of the
system. You can view detail system information
including serial number of the software.

CALIBRATION

The calibration of the screen is useful when some
malfunction occur with the touch screen and it needs
adjustment.
CALIBRATION procedure of the touch screen is
described as below: When the target moves to
another position, tap and hold at the center of the new
target. Repeat each time to complete the calibration
process. When the calibration has been completed,
the device switches back to the previous operating
mode and retain the previous setting. If you press
Reset button, the setting will return to factory setting.
TV SECTION (ONLY FOR PD-930T/PD-930BT)
Connect a TV BOX to the TV antenna jack of the unit. you can tap TV icon on main menu
screen or press mode on front panel or remote.
1. Connect TV antenna to the TV ANT wire in rear unit, and then press MODE button on front
panel or remote to select TV mode or Tap TV icon on main menu screen to enter TV mode.
2. In TV mode, press the Play/Pause buttons on front panel or remote once to enter TV menu
setting, or press touch screen to choose TV MENU icon to enter TV MENU.
3. Press the / on remote or tap the screen to select one of the setup pages: Auto program
=> Manual program.
20