Av-In Mode; Setting Control; Sound Control - Power Acoustik KSD9100 Owner's Manual

◆AV-IN MODE

To start AV-IN Mode, tap on AV-IN button from main menu screen.
Connect the external audio/video signal source to this unit. Select AV-IN mode in the main
menu or by pressing repeat Mode button on the front panel.
Note: If there is no external video input, the TFT displays "NO SIGNAL".
Press the

◆SETTING CONTROL

Your device has default system settings. You can customize the settings to suit your personal
needs. Once you change settings, your new settings will remain until you change it again.
To start SETTING, tap it on main menu screen.

SOUND CONTROL

Tap SOUND button to show SOUND 1 menu.
Tap button to show SOUND 2 menu.
Tap button to show SOUND 3 menu.
icon to be back to main menu.
EQ Select EQ mode
BAS LEVEL Bass up/down
TRE LEVEL Treble up/down
BALANCE Left/Right Balance Control
FADER Front/Back Fader Control
BEEP
LOUDNESS
LOUD LEVEL
SUBWOOFER
SUBW LEVEL
SUBW LPF Select a subwoofer crossover
option: 80HZ,120HZ,160HZ
17
Set keypad sound on /off
Set loud on /off
Adjust loud level
Set subwoofer on /off
Adjust subwoofer level