Power Acoustik KSD9100 Owner's Manual page 21

4. Press the ENTER button on remote or tap "Auto program or Manual program" on screen to
enter the page.
5. Press the / on remote buttons or tap relevant option to select the setting.
6. Press ENTER on the remote again to confirm, tap BACK to return to the setup page.
7. Press the △/ ▽Icon to adjust TFT angle.
8. Press the icon to be back to main menu.
Note: This function is available when TV tuner is connected.
TV MENU
Auto program (Auto seek mode)
System
Select this menu item is to set TV system: NTSC=>PAL=>SECAM, press ENTER button on
remote or tap the screen to select.
Audio
Select this menu item is to set the TV sound system:
When system setting PAL, TV sound system can set B/G=>I=>D/K=>/M/N, press ENTER on
remote or tap the screen button to select.
When system setting SECAM, TV sound system can set B/G=>I=>D/K, press ENTER on
remote or tap the screen button to select.
When system setting NTSC, press
Search
Select this menu item is to start searching and storing stations automatically.
Manual program (manual seek mode)
Storage
Select this menu item is to set the storage number.
System
Select this menu item is to set TV system: SECAM => NTSC =>PAL ，press NTER button on
the remote or tap the screen to select.
Audio
Select this menu item is to set the TV sound system:
when system setting PAL, press ENTER on remote or tap the screen button to select TV sound
system: D/K=>M/N=> B/G=> I.
When system setting SECAM, TV sound system B/G=>I=>D/K.
When system setting NTSC, press
Channel
Select this menu item is to set your desired searching channel, press
select one, or press
Fine
Select this menu item is to fine TV tuning and sound until it achieves the best quality, press
/ button on remote to adjust.
Memory
Select memory on or off is to set whether memory the searched station or not, press ENTER on
remote or tap the screen button to select.
button to automatic skip search term.
button to automatic skip TV channel term.
/
icon to select channel.
21
/ button on remote to