Change The Source (Src); Mute On/Off; Loudness On/Off; Preset Equalizer(Eq) - Power Acoustik PL-51B User Manual

GENERAL OPERATION (CONT.)
3. Press the or
4. Press the CLK button and the minutes will flash.
5. Press the or
6. Note: During Bluetooth mode, the clock can not be adjusted.
Change the Source (MODE)
Press the MODE button to switch between RADIO, BT(Bluetooth), USB(with USB device
inserted), CARD(with SD card inserted) and AUX-IN(auxiliary input) modes.

Mute on/off

In power on mode, briefly press the
will be also released when the volume knob is used.

Loudness on/off

Press the LOUD button on the remote control to turn on the loudness to reinforce the output
of bass frequencies, press again to turn it off.
Preset Equalizer (EQ)
Press the EQ button on the front panel or on the remote control to toggle between EQ OFF,
FLAT, POP, ROCK, CLASS.

Release the detachable front panel

Press the (Release) button to detach the detachable front panel, then the front panel can
be removed from the chassis.

USB port

The USB port of this car radio is designed for media playback from flash memory devices.
Note: This USB port is not designed to charge high-power devices.

Built-in Microphone

To receive your voice when you calling by using this bluetooth handsfree system.

Aux input connector

The 3.5mm auxiliary input stereo connection is designed for deiveces with 3.5mm line-out or
headphone output.

Reset System (RESET)

The RESET button is used to reset all parameters to factory default settings.
This function may be used when the LCD does not display normally or sound is distorted, or
when any of the controls are disabled. Press the
remove it, then use a thin object with a pointed end to depress the
6
button on the front panel or on the remote control to adjust the hour.
button on the front panel or on the remote control to adjust the minute.
MUTE button to toggle mute on or off.
button to release the front panel and
The muted state
RESET button.