Anti-Theft System - Power Acoustik PDR-340 Owner's Manual

Manual program (manual seek mode)
Storage
Select this menu item is to set the storage number.
System
Select this menu item is to set TV system: SECAM => NTSC =>PAL, press NTER button on the
remote control to select.
Audio
Select this menu item is to set the TV sound system:
1) When system settings PAL, press ENTER on remote or tap the screen button to select TV
sound system: D/K=>M/N=> B/G=> I.
2) When system setting SECAM, TV sound system B/G=>I=>D/K.
3) When system setting NTSC, M/N sound system can be selected only.
Channel
Select this menu item is to set your desired searching channel, press
to select one, or press
Fine
Select this menu item is to fine TV tuning and sound until it achieves the best quality, press
button on remote to adjust.
Memory
Select memory on or off is to set whether memory the searched station or not, press
ENTER on remote control to select.

Anti-theft system

Remove the panel
1. Press the PWR button to turn the power off.
2. Press OPEN button to detach the panel.
3. Pull the panel out.
4. Place the panel into the case and take it with you when you leave the car.
Remove the unit
1. Remove the panel and the trim plate.
2. Insert both T-Keys into hole on the front of the set until they lock.
3. Pull out the unit.
NOTE:
The source unit will turn off if the control panel is open longer than 60 seconds.
The LED light on the inner panel will twinkle in red when the ACC power is cut off.
/
icon to select channel.
16
/ button on the RC
/