TABLE OF CONTENTS Table of Contents…………………………………….…………….………………………..1 Safety Information………………………………………………….………………………2 Features…………………………………………………………….………………………4 Accessories……………………………………….…….………………………………….5 Wire Connection……………...……………………………..……………………………….6 Unit Installation and Removal………………………….….………………………………10 Front Panel………………………………………………………..…..……………………15 Base Panel.………………………………………………………..…..……………………19 Remote Control……………………………………………………………………………14 Touch Screen Operations………………………………………………….……………24 Touch Screen Calibration…………………………………….………………………24 Main Menu…………………………………………………….………………………25 Radio Operations…………………………………………………….……………….26 DVD Operations…………………………………………………….……………….27 Bluetooth Operations…………………………………………………….…………32 i-POD Operations…………………………………………………….……………….38 SD CARD Operations……………………………………………….………………..39 USB Operations…………………………………………………….………………..39 AV IN Operations…………………………………………………….………………40 AUX IN Operations………………………………………………….………………40...
SAFETY INFORMATION PLEASE READ COMPLETELY AND BECOME FAMILIAR WITH THE CONTENTS OF THIS MANUAL BEFORE INSTALLATION AND OPERATION OF THIS UNIT, AND KEEP IT CAREFULLY FOR FUTURE REFERENCE. This unit is a class 1 laser product. The laser beam may cause hazardous radiation if exposure to laser system directly.
Page 4
Cautions: To reduce the risk of fire or electric shock, and annoying interference, use only the recommended accessories. While driving, keep the volume level low enough to be aware of road and traffic conditions. Parking in direct sunlight can produce very high temperatures inside your vehicle. Give the interior a chance to cool down before starting playback.
FEATURES Single Din A/V Source Unit w/ 7” Flip-Up TFT-LCD Touch Screen & Bluetooth Connection • Motorized TFT-LCD Telescopes Forwards/Backwards w/ Pre-Set Angles • Detachable Theft Deterrent Front Panel Flips Down for DVD Loading • Accepts Add-On GPS Navigation Module, NAVIBOX-1 •...
ACCESSORIES Bolt and Nut M5 x 1 Back Strap x 1 M5X5 Screws x 4 Remote Control x 1 Power Wire x 1 Keys x 2 Mounting Sleeve x 1 Operational Manual x 1 Trim Bezel x 1 iPod Cable x 1 Slipcover x 1 External Microphone x 1 (Optional)
WIRE CONNECTION Cautions: -To prevent short circuits, remove the key from the ignition and disconnect the terminal of the battery. -Make the proper input and output cable connections for each unit. -Connect the wiring harness cables in the following order: ground wire, battery wire, ignition wire.
Page 8
1. RADIO ANTENNA ADAPTER IPOD ADAPTER ANALOG TV ANTENNA(OPTIONAL) NAVI ADAPTER(OPTIONAL) AUDIO /VIDEO OUTPUT & INPUT DIGITAL TV ADAPTER(OPTIONAL) 2. 15PIN SOCKET - 7 -...
Page 9
Brake Control Connect the brake control wire AUTO_ANT (see Wiring Diagram). It is necessary to connect the Brake Control wire to the Hand-brake switch of the car. While driving, the TFT monitor will display the alarm picture (see as follows) in order to ensure the safety.
UNIT INSTALLATION AND REMOVEL Please read all of the instructions before beginning the installation. Recommend having your unit installed by a professional installation shop. Tools and Supplies: You will need these tools and supplies to install your unit: - Torx type, flat-head and Philips screwdrivers - Wire cutters and strippers - Tools to remove existing radio (screwdriver, socket wrench set or other tools) - Electrical tape...
Page 12
Installation Method 1: 1 Install the mounting sleeve into 2 Bend the claws into place to the dashboard. secure the sleeve. 3 Slide the units into the mounting sleeve. 4 Install the trim bezel onto the unit. 5 Sketch map when installation finished. - 11 -...
Page 13
Removal Method 1: 1 Detach the trim bezel. 2 Insert the keys into the aperture between the unit and the mounting. 3 Pull the unit out of the mounting sleeve. 4 Sketch map when removal finished. - 12 -...
Page 14
Installation Method 2: 1 Tighten the bolt onto the rear 2 Tighten the back strap onto your panel of the unit. car inside the dashboard. 3 Place the unit into the dashboard; 4 Screw the unit on the car on the make the bolt bar across back strap;...
Page 15
Removal Method 2: 1 Detach the trim bezel. 2 Unscrew the unit off the car on the two sides. 3 Unscrew the Nut M5 screw on the rear 4 Sketch map when removal finished. side of the unit and pull out the unit. - 14 -...
FRONT PANEL 1. POWER 2. VOLUME / EQ 3. MUTE / LOUD 4. AUX IN 5. MIN USB 6. REMOTE 7. BAND 8. PLAY / PAUSE 9. F. REV 10. F. FWD 11. PREV 12. NEXT 13. STOP 14. REL 15.
Page 17
1. Power When ACC is on, press to turn the unit on; hold on pressing the button to turn off the unit. When the unit is on, press to switch between different modes. 2. Volume / EQ Rotate the button clockwise / anticlockwise to increase / decrease the volume. Press vertically to switch the EQ setting as following: USER –...
Page 18
15. Eject Press to eject / load a disc. 16. RESET Press and hold this button to switch back to all the original factory settings. Keep in mind this will erase all your preset radio stations and any EQ settings you may have made and saved.
Page 19
Press the [OPEN] Shut down the Halt Self-protection button ACC and restart While extending Retraction Extending Retraction Stop at the halt place While retraction and retract after 3 Extending Retraction seconds While turning Turning downward and Turning downward Extending upward retraction and retract ion While turning...
REMOTE CONTROL 1. POWER/SOURCE 13. PREVIOUS 25. SYSTEM / NAVI 2. MUTE 14. SLOW / END CALL 26. F.FWD 3. NUMBER BUTTONS 15. TITLE / PBN 27. RIGHT(Seek up) 4. MENU / * 16. ZOOM / CALL 28. STOP 5. AUDIO / # 17.
Page 21
1. [POWER/SOURCE] When ACC is on, press the button to turn the unit on; hold on pressing the button to turn off the unit. When the unit is on, press to switch between different modes. 2. [MUTE] Press to switch off the sound; press it again to resume to the previous volume level. 3.
Page 22
GPS Mode, press the [∨] / [∧] buttons to decrease / increase the brightness of the screen. 9. [BAND/ENTER] DVD Mode, press to confirm the selection. Radio Mode, press to switch the wave band as following: FM1 – FM2 - FM3 - AM1- AM2 - FM1 TV Mode, press to switch the TV audio as following: NTSC –...
Page 23
18. [OPEN/CLOSE/P.ANGLE/EJECT] When unit power off, press the button to turn unit on and the monitor will spread out and turn around to the last angle position. When unit power on, press the button, the monitor will spread out and turn around to the last angle position;...
Page 24
32. [A-B/PHONE PAIR] DVD Mode, press to set point A, press it again to set point B, then the unit starts to repeat from A to B. When playing DVD, MP3, press it again to stop repeating. When playing VCD, CD, press it again to repeat all tracks. Bluetooth Mode, press to start phone-pairing.
TOUCH SCREEN OPERATIONS TOUCH SCREEN CALIBRATION When “Power Off”, press the buttons 2, [BAND] of remote control to enter the CALIBRATION page: To touch the points from 1 to 5 until the points change to next cross by using a ballpoint pen or pencil.
MAIN MENU 1, Touch to access the DVD mode. 2, Touch to access the Radio mode. 3, Touch to access the NAVI mode. 4, Touch to access the i-POD mode. 5, Touch to access the ATSC mode. 6, Touch to access the SD CARD mode. 7, Touch to access the Bluetooth mode.
RADIO OPERATIONS Touch the [RADIO] icon to access to Radio Mode. 1. Current Source Indicator Displays the source currently playing, touch to return the main menu. 2. Mute Touch to switch off the sound; touch it again to resume to the previous volume level. 3.
DVD PLAYER OPERATIONS 1, Touch the [DVD] icon to access to DVD Mode if disc inside. 2, The unit will be switched to DVD Mode automatically when inserting the disc. 3, The unit will switch to RADIO Mode automatically if disc ejected. 1.
Page 29
1. Capture Image Touch to capture the current playing image and store into memory for background or screen saver. 3. Display Touch to display the current playback information on the screen. 4. Repeat Touch to repeat as CHAPTER-TITLE-ALL-REPEAT OFF when DVD playback. Touch to repeat as TRACK-ALL-REPEAT OFF when VCD/CD playback.
Page 30
2. Setup Touch to access the DVD SETUP menu. Touch the [<] / [>] icons to switch the main menus as following: SYSTEM – LANGUAGE – VIDEO – SPEAKER – DIGITAL ∧ ∨ Touch the [ ] / [ ] icons to access the submenus from main menus. ∧...
Page 31
LANGUAGE SETUP OSD LANGUAGE Following options are available for the OSD LANGUAGE: ENGLISH GERMAN SPANISH FRENCH PORTUGUESE ITALIAN RUSSIAN DUTCH SWEDISH KOREAN DANISH NORWEGIAN POLISH HUNGARIAN AUDIO LANGUAGE Following options are available for the AUDIO LANGUAGE: ENGLISH GERMAN SPANISH FRENCH PORTUGUESE ITALIAN RUSSIAN...
Page 32
CONTRAST Following options are available for the CONTRAST: Following options are available for the HUE: SATURATION Following options are available for the SATURATION: SPEAKER SETUP DOWNMIX Following options are available for the DOWNMIX: LT / RT STEREO FRONT Following options are available for the FRONT: LARGE SMALL DIGITAL SETUP...
BLUETOOTH OPERATIONS (Optional) Touch the [BLUETOOTH] icon to access the Bluetooth Mode: 1. Current Source Indicator Displays the source currently playing, touch to return the main menu. 2. Mute Touch to switch off the sound; touch it again to resume to the previous volume level. 3.
Page 34
1. Auto Answer Touch to select auto / manual answer when call is coming. 2. Phone Connect Touch to select auto / manual phone connect when return back the car. 3. Phone Pairing Touch the icon and the below words on information display: Then set the phone to pair with unit.
Page 35
PHONE CALL 1. Call Touch to call a number or receive a cell phone call. Touch to call the last number if no number input. 2. Clear Touch to cancel or clear the numbers you have input. 3. End Call Touch to reject or hang up a call.
Page 36
CALL IN When call in, you will see the below image: When talking, you will see the below image: When end the call, you will see the below image: - 35 -...
Page 37
PHONEBOOK 1. My Phonebook The phone numbers are stored in phone. 2. SIM Phonebook The phone numbers are stored in SIM card. 3. Dialed Call The phone numbers are dialed in phone. 4. Received Call The phone numbers are received in phone. 5.
Page 38
Phone Number List Touch the icon 1~5, when item is changed to yellow color, the item is selected. And touch it again and the item is changed to green color, the operation is active and you will see the below image: 1, Information Display You will see the phone number of the item in blue color.
IPOD OPERATIONS (Optional) 1, Touch the [IPOD] icon to switch IPOD Mode if iPod connected. 2, The unit will switch to IPOD Mode automatically if iPod connected. 3, The unit will switch to RADIO Mode automatically if iPod disconnected. Music Page Under the Music Page, it is not effective for the controller of iPod itself, use the keys of unit to control the operation and all operations are same as DVD Mode.
Video Page Under the Video Page, use the controller of iPod itself to control all operations of iPod including play music, videos and view pictures. 1. Music Touch the icon to access the music page. NOTE: The TV Output in iPod SETUP should be effective, and the pictures & videos could be displayed on the TFT monitor of unit.
AV IN OPERATIONS Touch the icon “AV IN” to enter the AV IN Mode: 1. Current Source Indicator Displays the source currently playing, touch to return the main menu. 2. Mute Touch to switch off the sound; touch it again to resume to the previous volume level. NOTE: There are 2 RCA Audio Inputs &...
Page 42
ATSC OPERATIONS (Optional) 1. Current Source Indicator Displays the source currently playing, touch to return the main menu. 2. Mute Touch to switch off the sound; touch it again to resume to the previous volume level. 3. Return Touch to return submenu to menu. 4.
NAVI OPERATIONS (Optional) Touch Screen Calibration When 1 time to enter NAVI mode, you will see the calibration screen. Please touch the points from 1 to 5 by using a ballpoint pen or pencil. To verify the calibration, please touch the points from 1 to 5 again. Then the following screen is displayed: - 42 -...
Page 44
The Touch Screen is restored to their default positions. Touch anywhere of panel to finish the calibration and go to the following screen: Read information and touch “I agree” button at the bottom of the screen, then enter the NAVI mode. NOTE: If change the NAVIbox to connect another unit, please take out the SD card from the NAVIbox and connect with computer, the following screen is displayed on computer:...
Page 45
Go to NAVI mode Touch the icon “NAVI” to enter the NAVI Mode if NAVIBOX connected: Following screen will be displayed: Read information and touch “I agree” button at the bottom of the screen. Enter the NAVI mode by main menu, the NAVI operations are effective only, all other processes are disable such as Radio, CD etc.
Quick Access Key [NAVI] Under any working mode, press the [NAVI] button to switch to NAVI mode; press the [NAVI] button again to return the previous working mode. For example, under Radio mode, press the [NAVI] button to switch to NAVI mode; press the [NAVI] button again to quit the NAVI mode and return back the Radio mode.
SYSTEM PARAMETERS SETUP Touch the [SYSTEM] icon to enter the System Parameters Setup. SCREEN SETUP 1. Contrast Touch [UP] / [DOWN] icons to adjust the CONTRAST parameters (Range: -9 to 9); 2. Tint Touch [UP] / [DOWN] icons to adjust the TINT parameters (Range: -9 to 9); 3.
Page 48
4. Sub-Woofer Volume Touch [UP] / [DOWN] icons to adjust the SUB-WOOFER volume parameter (Range: 0 to 15); 5. Buzzer Touch to turn Buzzer on or off; 6. Balance / Fader Touch [LEFT] / [RIGHT] icons to adjust the BALANCE parameters (Range: -9 to 9); Touch [FRONT] / [REAR] icons to adjust FADER parameters (Range: -9 to 9);...
Page 49
1. Source Images List Touch [UP] / [DOWN] icons to select the image captured from DVD, SD card and USB. 2. Screen Saver Images List Touch [UP] / [DOWN] icons to select the image of screen saver. 3. Desktop Touch to set the selected image of source images list as desktop image. 4.
SPECIFICATIONS GENERAL Supply Voltage : 14.4V DC (11-16V allowed) Load Impedance : 4Ω per channel Max Power Output : 50W x 4 : ≥ 10dB Bass 100Hz : ≥ 10dB Treble 10KHz Dimensions (approx.) : 180 x 188 x 59 mm (d/w/h) Mounting (approx.) : 160 x 178 x 50 mm (d/w/h) FM TUNER...
TROUBLE SHOOTING If any of problem persists after checking the below list, Please consult your nearest service dealer. Never attempt to disassemble and repair unit personally. Problem Cause Action GENERAL Yellow wire not connected or incorrect Check connections for proper voltage Re wire not connected voltage(11-16vdc) or incorrect...
Page 52
Problem Cause Action TFT MONITOR No video display Reverse circuit not connected Check connections at reverse lamp (when in Vehicle is not in reverse Select reverse gear reverse) Front panel will Remove the obstruct and press Front panel obstructed OPEN to resume the monitor open/close open/close sequence Flashing image...
DISC NOTES ■ Disc formats supported by this player Handling and Cleaning ● Dirty, dusty, scratched or warped discs will cause misoperation. ● Do not place stickers or make scratches on discs. ● Do not warp discs. ● A disc should always be kept in its case when not in use to prevent from damage. ●...