Operation And Important Riding Points; Starting A Cold Engine - Yamaha WR450F 2013 Owner's Manual

Read the Owner's Manual carefully to
become familiar with all controls. If
there is a control or function you do not
understand, ask your Yamaha dealer.
WARNING
Failure to familiarize yourself with
the controls can lead to loss of con-
trol, which could cause an accident
or injury.

OPERATION AND IMPORTANT RIDING POINTS

EAU15951
TIP
This model is equipped with:

a lean angle sensor to stop the en-
gine in case of a turnover. In this
EWA10271
case, the multi-function display in-
dicates error code 30, but this is
not a malfunction. Push the main
switch to "OFF" and then to "ON"
to clear the error code. Failing to
do so will prevent the engine from
starting even though the engine
will crank when pushing the start
switch.

an engine auto-stop system. The
engine stops automatically if left
idling for 20 minutes. In this case,
the multi-function display indicates
error code 70, but this is not a mal-
function. Push the start switch to
clear the error code and to restart
the engine.
EAU55880

Starting a cold engine

NOTICE
For maximum engine life, never ac-
celerate hard when the engine is
cold!
In order for the ignition circuit cut-off
system to enable starting, one of the
following conditions must be met:


1. Push the main switch to "ON" and
NOTICE
If a warning light does not come on
initially when the main switch is
5-1
The transmission is in the neutral
position.
The transmission is in gear with
the clutch lever pulled and the sid-
estand up.
See page 3-19 for more informa-
tion.
make sure that the engine stop
switch is set to " ".
The following warning
should come on for a few seconds,
then go off.

Fuel level warning light

Engine trouble warning light
EAU52905
ECA11042
2
3
4
5
6
7
8
lights
9
ECA17781