Rear Wheel - Yamaha WR450F 2013 Owner's Manual

Tightening torque:
Front wheel axle pinch bolt:
21 Nm (2.1 m·kgf, 15 ft·lbf)
8. Push down hard on the handlebar
several times to check for proper
fork operation.
PERIODIC MAINTENANCE AND ADJUSTMENT

Rear wheel

To remove the rear wheel
WARNING
To avoid injury, securely support the
vehicle so there is no danger of it
falling over.
1. Loosen the axle nut.
1
2
1. Axle nut
2. Washer
2. Lift the rear wheel off the ground
according to the procedure on
page 6-36.
3. Remove the axle nut and washer.
4. Loosen the locknut on each side of
the swingarm.
6-38
EAU25080
EAU45183
EWA10821
1. Drive chain slack adjusting bolt
2. Locknut
3. Brake caliper
5. Turn the drive chain slack adjust-
ing bolts fully in direction (a).
6. Push the wheel forward, and then
remove the drive chain from the
rear sprocket.
(a)
2
3
2
3
1
4
5
6
7
8
9