Replacing The Fuse; Replacing The Headlight Bulb - Yamaha WR450F 2013 Owner's Manual

Replacing the fuse

1
1. Fuse
2. Spare fuse
The fuse is located under the seat.
(See page 3-13.)
If the fuse is blown, replace it as fol-
lows.
1. Push the main switch to "OFF" and
turn off all electrical circuits.
2. Remove the blown fuse, and then
install a new fuse of the specified
amperage. WARNING! Do not
use a fuse of a higher amperage
rating than recommended to
avoid causing extensive dam-
age to the electrical system and
possibly a fire.
[EWA15131]
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU52422
Specified fuse:
15.0 A
3. Push the main switch to "ON" and
2
turn on the electrical circuits to
check if the devices operate.
4. If the fuse immediately blows
again, have a Yamaha dealer
check the electrical system.

Replacing the headlight bulb

This model is equipped with a halogen
bulb headlight. If the headlight bulb
burns out, replace it as follows.
NOTICE
Take care not to damage the follow-
ing parts:


6-32
Headlight bulb
Do not touch the glass part of
the headlight bulb to keep it free
from oil, otherwise the transpar-
ency of the glass, the luminosity
of the bulb, and the bulb life will
be adversely affected. Thor-
oughly clean off any dirt and fin-
gerprints on the headlight bulb
using a cloth moistened with al-
cohol or thinner.
Headlight lens
Do not affix any type of tinted
film or stickers to the headlight
lens.
Do not use a headlight bulb of a
wattage higher than specified.
EAU53220
ECA10650
2
3
4
5
6
7
8
9