Programming A New Remote - idatastart HC3 Owner's Manual

6
BUTTON(S) FUNCTION
Ignition Lock
, +
ON/OFF
Passive Lock &
, +
Arm ON/OFF
Turbo
, +
ON/OFF
Weather Start
, +
ON/OFF
Lock Remote
, , ,
Unlock Remote
, , ,
Mute Remote
, , ,
ON/OFF

PROGRAMMING A NEW REMOTE

Are you replacing a lost or damaged remote or simply adding an extra remote to your iDataStart system?
Please take note of the following:
1. A functional iDataStart HC3
2. All new remotes must be installed by an
3. A maximum of 4 remotes can be programmed to your iDataStart system. Ask your
Authorized Dealer for compatible remotes.
IDATASTART OWNER'S GUIDE
CONFIRMATION (2-WAY ONLY)
1 chime ON
2 chimes OFF
1 chime ON
2 chimes OFF
1 chime ON
2 chimes OFF
1 chime ON
2 chimes OFF
1 chime + 1 flash
2 chimes + 2 flashes
1 chime ON
2 chimes OFF
system must already be installed in your vehicle.
iDataStart HC3
CUSTOMER SUPPORT: 866.427.2999 / WWW.IDATASTART.COM
FUNCTION DESCRIPTION
Automatically locks doors when engine is
running.
Automatically locks & arms your vehicle 60
seconds after you unlock it.
Cool down your turbo before turning the
engine off. Programmable runtime from 1
to 4 minutes.
Set your vehicle to automatically remote
start every 2, 3 or 4 hours (programmable)
or from a temp. sensor sold separately.
Disable all functions on your remote.
Pressing a button will generate 6 chimes +
6 flashes. Available with 2-way remote only.
Enable all functions on your remote.
Available with 2-way remote only.
Disable the chime when pressing any but-
ton on your remote. Available with 2-way
remote only.
Authorized Dealer.
iDataStart HC3