Remote Functions & Confirmations - idatastart HC3 Owner's Manual

4
REMOTE FUNCTIONS & CONFIRMATIONS
Thanks to their multiplexing technology, iDataStart HC3 remotes offer over 30 functions using only 5
buttons. In order to get the most out of your remotes, please take a moment to get acquainted with
the following functions:
NOTES:
1. Available functions must be enabled by an Authorized Dealer during installation to be functional on remote
2. Non-highlighted icons = Press & release button
3. Highlighted (grey) icons = Press & hold button for 2.5 seconds
4. Coma (,) between icons = Press buttons one after the other
5. Plus (+) between icons = Press buttons simultaneously
6. Timeout between each button press = 3 seconds
7. Function* = Available in 2nd Car Mode
8. Confirmations are only available with FLEX 2W and FLEX 2WX remote configurations.
BUTTON(S) FUNCTION
Lock & Arm*
Unlock &
Disarm*
--
Query*
Panic*
AUX 5*
Trunk Release
IDATASTART OWNER'S GUIDE
CONFIRMATION (2-WAY ONLY)
1 chime + 1 flash
2 chimes + 2 flashes
1 chime + 1 flash
CUSTOMER SUPPORT: 866.427.2999 / WWW.IDATASTART.COM
FUNCTION DESCRIPTION
Secure your vehicle by locking the doors
and arming the alarm.
Access your vehicle by unlocking the doors
and disarming the alarm.
Trigger the panic siren.
To be completed by Authorized Dealer if applicable
Release the trunk or hatch.