Ebyte E70-433NW3S0 User Manual page 19

Chengdu Ebyte Electronic Technology Co,;Ltd
(reboot valid)
AT+RSCFG=?
AT+RSCFG=Value
Example：AT+RSCFG=0
Note: This parameter can be used for node disconnection detection. It is recommended to open it.
AT+UBCFG Setting /Querying the baud rate parameter (reboot valid)
AT+UBCFG=?
12
AT+UBCFG=Value
Example：AT+UBCFG=7
AT+UPCFG Setting /Querying the device parity parameter (reboot valid)
AT+UPCFG=?
13
AT+UPCFG=Value
Chengdu Ebyte Electronic Technology Co,;Ltd
Copyright ©2012–2019，
Description:
Gets the reboot parameter configuration
Response：
RSCFG:0
Description:
Value：0 or 60~65535（S）
When the value less than 60s, the system judges 60, equals 0s, does not restart
Description：
Obtains the baud rate parameter
Response：
UBCFG:7
Description：
Value:0~7
0：1200
1：2400
2：4800
3：9600
4：19200
5：38400
6：57600
7：115200
Description
Gets the device parity parameter
Response：
UPCFG:0
Description：
Value:0~2
0：None
1：Odd parity
2：Even parity
E70-433NW30S user manual
18