Ebyte E70-433NW3S0 User Manual page 18

Chengdu Ebyte Electronic Technology Co,;Ltd
（This instruction is valid for coordinator only） Value：0~2
Example：AT+TFICFG=0
AT+TMCFG Setting/Querying transport mode configuration (reboot valid)
AT+TMCFG=?
8
AT+TMCFG=Value
Example：AT+TMCFG=0
Note: The coordinator and node should have the same transmission mode before they can access the network.
AT+ PIDCFG Setting/Querying PANID configuration（reboot valid）
AT+PIDCFG=？
9
AT+PIDCFG=Value
Example：AT+PIDCFG=65535
Note: The node can only join the same network as its PANID (any network can be added when it is configured as 65535)
AT+ DMCFG Setting/Querying dormancy time configuration(reboot valid)
AT+DMCFG=？
10
AT+DMCFG=Value
Example：AT+DMCFG=0
11 AT+RSCFG Setting/Querying the reboot parameter configuration
Chengdu Ebyte Electronic Technology Co,;Ltd
Copyright ©2012–2019，
0：Input Broadcast(Only the coordinator works)
1：Input Short Address+Data (0x0000 0xfff) are broadcast address
2：Input Long Address+Data
（0x000000000000 0xffffffffffffffff）are broadcast address
Description:
Gets transport mode configuration
Response：
TMCFG:0
Description：
Value：0 or 1
0：Long Range mode，LRM
1：Standard transmission mode,GFSK
Description:
Gets PANID configuration
Response：
PIDCFG:65535
Description:
Value:0~65535
Description:
Gets dormancy time configuration
Response:
DMCFG:0~60
Description: Configure wakeup period of sleep node
Value: dormant time, per unit second (S). 0~60 S.
Note: When configured as 0, the node will never wake up, that is, the node cannot receive
data but can upload data
E70-433NW30S user manual
17