Ebyte E70-433NW3S0 User Manual page 17

Chengdu Ebyte Electronic Technology Co,;Ltd
Example：AT+ WMCFG =4
Note: 1. After setting a new mode, it needs to be reset or power off and restart
AT+DINFO Get facility information
AT+DINFO=ALLNODE
5
AT+DINFO=SELFS
AT+DINFO=SELFE
Example：AT+DINFO=SELFE
AT+ TFOCFG Setting/Querying output format configuration (reboot valid)
AT+ TFOCFG=？
6
AT+ TFOCFG=Value
Example：AT+ TFCFG=0
AT+ TFICFG Setting/Querying input transmission format configuration (reboot valid)
7 AT+ TFICFG=？
AT+ TFICFG=Value
Chengdu Ebyte Electronic Technology Co,;Ltd
Copyright ©2012–2019，
2, Dormant Node；
3, Sleep mode；
4, (factory default), dial switch control
Description:
Query the short and long address of all node, and return by UART.
It works only when the device works in the coordinator mode
Description:
Get short address and return by UART
Description:
Get long address and return by UART
Description:
Gets output format configuration
Response：
TFOCFG:0
Description:
Value：0~7
0：Output: valid data (transparent transmission)）
1: Output: Valid Data +Long Address
2：Output: Valid Data +Short Address
3：Output: Valid Data+RSSI
4：Output：Valid Data+Long Address+Short Address
5：Output：Valid Data+Long Address+RSSI
6：Output：Valid Data+Short Address+RSSI
7：Output：Valid Data+Long Address+Short Address+RSSI
Description:
Gets input transmission format configuration
Response：
TFICFG:0
Description:
E70-433NW30S user manual
16