MUTOH Valuevet VJ-2638X Operation Manual page 64

Before using
• When "100%" is displayed, the initial ink replenishment is complete.
• After the initial ink replenishment is complete, "Media End" is displayed on Operation panel.
CAUTION
• Comply strictly with the following during ink filling. If filling is interrupted, ink will
be lost when filling is resumed.
• Do not turn OFF the power of the printer.
• Do not unplug the power cord set of the printer.
• Do not open Front cover.
• Do not open Maintenance cover.
• Do not raise Media loading lever.
NOTE
• VJ-2638X/1938X/1638X automatically decides to use either four colors or seven colors based on
the number of ink cartridge colors installed at the time of initial ink replenishment. You do not need
to make any special settings.
• Users cannot change the number of ink cartridge colors after the initial ink replenishment on VJ-
2638X/1938X/1638X. To request a change, contact your local MUTOH dealer.
• If the printer perform the nozzle check printing immediately after the initial ink replenishment is
complete, the following results may occur.
• Printed lines become blurred.
• The data is partially not printed.
In such cases, follow
result.
If there is no improvement in the print result even after refilling a small amount of ink, leave the
printer unused for an hour or more. Then, refill a small amount of ink again and check the print
result.
If there is still no improvement, contact your local MUTOH dealer.
64
VJ-2638X/1938X/1638X/1938WX/1638WX OPERATION MANUAL
5.3 Cleaning menu and refill a small amount of ink. Then, check the printing
Filling ink