Led Indicator - ICP DAS USA WF-2572M User Manual

LED Indicator

2.2.4
The LED Indicator can be divided into two types. The one is signal strength indicator. The
other is system status indicator. The description of the LED indicator as shown in Table 2-3.
Limit-AP mode
Signal strength-Green
Signal strength-Yellow
Power (PWR)
Connection Status(LINK)
Communication(COMM)
Infrastructure mode
Signal strength
Power (PWR)
Connection Status(LINK)
Communication(COMM)
Table 2-3. The description of LED indicator
LED
Always ON
Always ON
OFF
Always ON
OFF
Blink/Always ON
OFF
Blink
OFF
Always ON
OFF
Blink/Always ON
OFF
Blink
OFF
WF-2572 Series, Ethernet to Wi-Fi Bridge (V1.10, 2019/08/30) 11
LED Status
Device at Limit-AP mode
AP at 2.4 GHz
AP at 5 GHz
Power Good
Power failure
Unconnected
Connected
Data transmission
Bus Idle
Signal strength: High
Signal strength: Medium
Signal strength: Low
Unconnected
Power Good
Power failure
Unconnected
Connected
Data transmission
Bus Idle
Description