Table of Contents
Advertisement
RUGGEDCOM RS8000A
Installation Guide
Figure 7: Failsafe Alarm Relay Wiring
1. Normally Closed
2. Common
Section 2.4
Grounding the Device
The RS8000A chassis ground terminal uses a #6-32 screw. It is recommended to terminate the ground
connection with a #6 ring lug and torque it to 1.7 N·m (15 lbf·in).
Figure 8: Chassis Ground Connection
1. Stainless Steel Stud
Section 2.5
Connecting to the Device
The following describes the various methods for accessing the ROS console and Web interfaces on the device.
For more detailed instructions, refer to the ROS User Guide for the RS8000A.
Serial Console Port
Connect a PC or terminal directly to the serial console port to access the boot-time control and ROS console
interface.
Grounding the Device
3. Normally Open
2. #6-32 Screw
3. #6 Ring Lug
1
2
3
2
3
1
Chapter 2
Installing the Device
11
Advertisement
Table of Contents
