Table of Contents
Advertisement
RUGGEDCOM RS8000A
Installation Guide
2
Figure 1: Front and Rear Panels
1. Power Indicator LED
Power Indicator LED
Reset Button
Port Status Indicator LEDs
RS232 Serial Console Port
Ports, Controls and Indicator LEDs
1
2. Reset Button
3. Port Status Indicator LEDS
This LED indicates the status of the power supply.
• Green = The power supply is supplying power
• Off = Power is off
The reset button shuts down and restarts the device.
These LEDs indicate when serial ports are active.
This port is for interfacing directly with the device and accessing initial management
functions.
3
4. RS232 Serial Console Port (DB9)
LED
Link
RX
Blinking
TX
Blinking
State
Meaning
Solid
Link detected
Off
No link detected
Link activity (receiving)
Off
No link activity
Link activity (transmitting)
Off
No link activity
Chapter 1
Introduction
4
3
Advertisement
Table of Contents
