Operation - HighSecLabs K244E User Manual

Operation

Now that you have connected your console and computers to the
Switch, it is ready for use. Default channel after power up is channel
#1 as indicated by channel select LED #1 illumination. You can select
which computer you wish to control by one of the following methods:
Default Channel
After product boots up, the default active channel will be channel
#1. This will be indicated by white color illumination of
push-button #1.
Product Mapping to Sources
Product mapping to sources is indicated by stickers/labels specifying
which channel is mapped to which computer.
Front Panel Push-Buttons
Following power up, the default channel is #1.
The user can select any other channel by pressing the appropriate
front panel push button.
The mouse cursor will be positioned at the center of the selected
computer display.
The currently selected channel is indicated by white color
illumination of the appropriate push-button.
17
K244E Secure Dual-Head KVM Switch User Manual
Important Security Note:
If you are aware of potential security vulnerability while
installing or operating this product, we encourage you to
contact us immediately in one of the following ways:

Web form: http://www.highseclabs.com/support/case/

Email: security@highseclabs.com

Tel: +972-4-9591191 or +972-4-9591192
Important: If the unit's enclosure appears disrupted or if all
channel-select LEDs flash continuously, please remove product
from service immediately and contact HSL Technical Support at
http://www.highseclabs.com/support/case/
Important: This product is equipped with always-on active anti-
tampering system. Any attempt to open the product enclosure
will activate the anti-tamper triggers and render the unit
inoperable and warranty void.