Operation; Operating The Mini-Matrix - HighSecLabs SX22D-3 Quick Start Manual

Table of Contents
SECTIONS

OPERATION

Operating the Mini-Matrix

Step 1 - Display and Control Options
Display and control options define which source to display and
control on each screen. Source selection is done using the
source selection buttons on the front panel or via the DCU
(dedicated control unit) port.
•
Use the source selection panels to choose which source to
display on each screen.
•
The left panel controls which source to display on the
primary display, while the right panel controls the
secondary display. For example, as seen in the illustration,
when #1 is selected on the primary panel and #3 is selected
on the secondary panel, the selected sources are presented
accordingly.
•
A source can be duplicated, by selecting its number on
both panels.
•
By default, mouse, keyboard, audio, and fUSB peripherals
follow the display association.
•
Independently switch the video/usb /audio /keyboard and
mouse ports between computers.
HSL Mini-Matrix Quick Setup Guide
1 2
•
Use the front-panel push buttons to independently
switch the video/USB/audio/keyboard and mouse ports
between the primary and secondary computers. This is
useful for various scenarios, for example:
◦ It is possible to switch every peripheral device group
independently between the two projected
computers.
◦ Video, HID (keyboard and Mouse), audio, and fUSB
can be switched independently.
◦ When a user wants to listen to audio originating
from one computer while, working on another
computer.
3
11