Table of Contents
Advertisement
Features and Operation
Basic Operations
1. Turn on the radio: Turn the Power/Volume Control Knob clockwise until a "click" is
heard.
2. Adjust the volume: Turn the Power/Volume Control Knob to adjust the volume. When
function key is programmed with monitor feature,
function key to adjust the volume to a comfortable level.
3. Select
a
Channel: Rotate Channel Selector knob to select your desired channel.
4. Transmit:
Hold down the [PTT]
Keep microphone about 5cm away from your mouth.
5. Receive: Release
the [PTT]
Note: when battery voltage becomes too low, transmission will stop and radio LED flashes
red. Please refer to
"Low Battery
Time-Out-Timer (TOT)
The Time-Out-Timer (TOT) is used to prevent someone from using the same channel for
a long time and to prevent the radio from damage due to continuous transmission.
If the transmission exceeds the preset time (it's set by your dealer), transmission will be
inhibited
and a beep tone will sound. To stop the beep tone, release the
the
[PTT]
key again to
■ TOT Reset Time
When this feature is activated, TOT won't reset until
your dealer) expires, even if you have released the
■
TOT Rekey Time
TOT Rekey Time is the duration that transmission is resumed after being inhibited by TOT.
When this feature is activated,
Rekey Time
(it's set by your dealer) expires, even if you have pressed the
key, speak into the microphone with normal voice.
key, the radio returns to receive mode.
Alert" for more details.
resume
transmitting.
transmission will remain
13
turn the knob while holding down the
[PTT]
the preset TOT Reset Time
[PTT]
key.
inhibited
until
the preset TOT
key. Press
(it's set by
[PTT]
key.
Advertisement
Table of Contents
