Table of Contents
Advertisement
■
TOT Pre-Alert
Your dealer can program a TOT Pre-Alert feature to alert you just before the TOT expires.
When this feature is activated, the radio will sound an alert tone at the preset TOT
Pre-Alert time
(1-255s before the TOT
after this time.
Battery Save
The Battery Save feature is enabled by your dealer to minimize the power consumption.
When there is no activity on the channel and no operation is performed for 10 seconds,
the Battery Save feature is automatically activated. When a signal is received or an
operation is performed, the Battery Save feature is automatically deactivated.
Low Battery Alert
Low Battery Alert alerts you to recharge or replace the battery. During transmission, when
the battery voltage goes below a preset value, the LED indicator will flash red. When the
alert tone sounds, the radio stops transmitting. Please recharge or replace the battery.
Monitor
This feature is enabled/disabled by your dealer. In receive mode, press
preprogrammed MONI key
especially useful for adjusting volume level or receiving a weak signal. The LED indicator
glows green in monitor mode.
Programmable Function Key
This key can be programmed as a shortcut to Monitor or High/Low Power feature, or set
inactive through the programming software. 3 types of key pressing can be defined:
Short
Press—quickly press and release the key within 1 second
●
●
Long
Press—press and hold the key for more than 1 second
● Press—press the key in any manner
expires). Transmission will be inhibited by TOT
to monitor activities on the current channel. This operation is
14
the
Advertisement
Table of Contents
