Table of Contents
Advertisement
Features
Monitor
Press the MONI button to monitor any activity on the channel. Wait for this activity to clear before
transmitting.
Channel Scan
Channel scan is set to monitor desired activities on all channels in scan
enabled, the radio will automatically scan all channels in scan list until activity is detected on a channel.
The scanning will then stop and the receive audio will be heard.
When scanning stops on an active channel, it will restart in the preset restart mode that is set by the
dealer. Scan restart mode can be either Time operated scan or Carrier operated scan.
①Time Operated Scan
If scanning stops on an active channel, and continues to listen for a preset period (the time is preset by
the dealer), it will begin scanning other channels even if there is still activity on the channel.
②Carrier Operated Scan
Scan will lock in on the busy channel until there is no activity.
Channel Scan Operations
1. Press SCAN key
Scan starts from the current channel and then scrolls all selected channels in sequence.
2. Press UP or DOWN key to change channel scan sequence. Press the UP key; radio skips the
current channel and scans other selected channels in ascending order; press the DOWN key;
radio skips the current channel and scans other selected channels in descending order.
3. Press SCAN key again, scan stops.
4. Adding or deleting a channel in/from the scan list. The dealer can add or delete a channel in/from
the scan list. Only channels in the scan list can be scanned.
Priority Channel Scan
If your dealer has set a priority channel, when radio scans non-priority channels, it will periodically
sample the priority
channel.
priority channel for communications.
Scan Revert Channel
The scan revert channel feature allows you to transmit on the proper channel while initiating a call
during channel scan. Press [PTT] button, radio stops scanning and transmits on the revert channel.
This feature is set by the dealer.
Selectable CTCSS/CDCSS
CTCSS/CDCSS feature is used to avoid receiving unwanted signals on the same channel. When
CTCSS/CDCSS is enabled, the radio only allows audio with the same CTCSS/CDCSS code to
activate the speaker. If CTCSS/CDCSS is disabled, the radio will hear all calls on the same channel.
When the dealer allows CTCSS/CDCSS to be selectable by the end user, the operations are as
follows:
If desired activity is detected on the priority channel, it will switch to the
list.
When channel scan is
11
Advertisement
Table of Contents
