Setting Up Mt380; Connecting Power; Charging The Battery - Unitech TASHI MT380-A7WE0G User Manual

Setting up MT380

This section explains how to charge the battery and how to turn on MT380 for the first time.

Connecting Power

Follow these instructions to connect power to MT380.
NOTE:
A UPS battery is used for normal operation when there is no main power. The battery
also functions as a data backup battery. Therefore, data you enter may not be properly
stored until the built-in backup battery has been adequately recharged.
1. Plug the adapter cable into the DC input jack of the terminal (1), then connect the adapter into
an electrical outlet (2).
2. Turn on the backup battery by switching it left to charge the battery.
On

Charging the Battery

Before using MT380 for the first time, you need to charge it for about 12 hours. The battery begins
charging as soon as you connect the power cable.
2
Copyright 2009 Unitech Electronics Co., Ltd. All rights reserved. Unitech is a registered trademark of Unitech Electronics Co., Ltd.
1
Off
2