Installing The Cap Over The Speaker/Microphone Jacks; Installing The Optional Speaker/ Microphone - Kenwood TK-3180-K2 Instruction Manual

KENWOOD CORPORATION
TK-3180-K2, TK-3180-K4 FCC ID:ALH37333120 IC:282D-37333120

Installing the Cap over the Speaker/Microphone Jacks

If you are not using an optional KMC-25 speaker/ microphone, install the cover over the univeral connector using the
supplied 4 x 6 mm screw.

Installing the Optional Speaker/ Microphone

1 Insert the guide of the speaker/ microphone connector into the groove of the universalconnector.
2 Secure the connecter in place using the attached screw.