Sony HDC-750 Operation Manual page 76

Connecting an HDCD-50 to the camera
adaptor
You can connect an HDCD-50 HD Signal Distributor
to the camera adaptor attached to the camera, as shown
in the figure below.
HDCA-750 HD Camera Adaptor
HDC-750
HDCD-50
Connecting a camera control unit or
remote control panel to the camera
adaptor
You can connect an HDCU-700A HD Camera Control
Unit to the camera adaptor attached to the camera, as
shown in the figure below.
HDCA-750 HD Camera Adaptor
HDC-750
HDCU-700A
Camera Control
Unit
Connecting a Camera Control Unit
HDCZ-10/25
Connection Cable
Microphone output
Video output
Power input
FC2-PD50/PD250
Optical Fiber Cable
Microphone output
Video output
Power input
HDCA-750 HD Camera Adaptor
HDC-750
Connecting a Remote Control Unit
Connecting a camera control unit to the
camera adaptor
Of the camera's functions executable by menu
operations, the following are also executable by
remote control from a remote control panel or master
setup unit connected to the camera adaptor.
• Auto-setup (level adjustment, auto black and white
balance adjustment)
• Clearing scene file or setup file data
• Clearing painting data
• Test signal output
About color bar or test signal output
When performing auto-setup using a remote control
panel or master setup unit, setup may be performed
during the output of a color bar or test signal. After
setup is complete, the color bar or test signal will again
be displayed on the viewfinder screen.
For more information, refer to the HDC-750 System Manual
(not supplied).
Chapter 3 Preparations
CCA-5 Connection
Cable
RCP-700 series
Remote Control
Panel
3-3(E)