Sony HDC-750 Operation Manual page 70

For information on setting the gain values, see "4-5-3
Setting the gain selection values" on page 4-12(E).
When the MESSAGE setting on the VF DISPLAY
page of the OPERATION menu is set to ON, the
newly selected gain value will be displayed in the
setting change/adjustment progress message display
area of the viewfinder screen for three seconds when
the gain setting is changed using this switch.
Example: "GAIN: 12 dB"
6 OUTPUT/DCC (output signal selection /
dynamic contrast control) switch
Selects the signal (color bar signal or camera's video
signal) to be used as output to a VTR, the viewfinder,
or a video monitor. When the camera's video signal is
being used as output, the DCC function may be used.
The relationship between the switch setting and the
output signal and DCC function is shown in the table
below.
OUTPUT DCC Function
BARS OFF Output is a color bar signal.
CAM OFF Output is the camera's video signal.
The DCC circuit is disabled.
CAM ON Output is the camera's video signal.
The DCC circuit is enabled.
7 WHITE BAL (white balance memory selection)
switch
Selects the white balance adjustment method, or the
memory used to store the adjusted value.
PRST (preset): White balance is adjusted to a
preset value corresponding to a color
temperature of 3200K.
A or B: Selects memory A or B. When the AUTO
W/B BAL switch !¡ is set to WHT, the white
balance will be automatically adjusted
according to the setting of the FILTER control.
The adjusted value will be stored in the selected
memory. Each memory can store up to four
adjusted values, for a total of 8.
When the MESSAGE setting on the VF DISPLAY
page of the OPERATION menu is set to ON, the new
setting will be displayed in the setting
change/adjustment progress message display area of
the viewfinder screen for three seconds when the
setting is changed using this switch.
Example: "WHITE: Ach" or "WHITE: PRESET"
8 CANCEL button
When a menu is displayed on the viewfinder screen,
pressing this button will cancel any changed setting
and return the display to the previous menu. When
menus are not displayed on the viewfinder screen,
pressing this button will display the !LED item.
9 MENU SEL (menu select) control (rotary
encoder)
Used to select settings from menus displayed on the
viewfinder screen (by rotating the control) and to
confirm settings (by pushing the control).
0 FILTER (internal filter selection) control
Used to select an internal filter appropriate for the light
source illuminating the subject.
Color temperature conversion filter
ND Filter
1 clear A cross filter
2 1/4 ND B 3200K
3 1/16 ND C 4300K
4 1/64 ND D 6300 K
!¡ AUTO W/B BAL (white and black balance
automatic adjustment) switch
Automatically adjusts white and black balance.
WHT: Automatically adjust white balance.
BLK: Automatically adjust black balance.
Chapter 2 Location and Function of Parts
2-3(E)