Operation; Main Unit Display; Clean Air & Humidify Mode - Sharp KC-C70E Operation Manual

OPERATION

MAIN UNIT DISPLAY

Filter Reset Button/
Indicator Light (red)
Light ON/OFF Button
CLEAN AIR & HUMIDIFY MODE
Use the Clean Air & Humidify Mode to quickly clean the air, reduce odours and to humidify.
1
Fill Water Tank. (See E-7)
2
Press the CLEAN AIR & HUMIDIFY MODE Button.
• If the power cord was not unplugged between uses, the
unit will automatically re-start at the previously selected
settings.
3
Press the FAN SPEED Button to select the de-
sired fan speed.
• Indicator lights will show the fan speed
currently selected.
Press the Power OFF Button to turn the unit off.
About Automatic Humidify Mode
About the Temperature/Humidity Sensors. The Temperature/
Humidity sensors automatically detect and adjust humidity
according to changes in room temperature. Depending on
the size and humidity of the room, humidity may not reach
55~65%. In such cases, it is recommended that CLEAN AIR
& HUMIDIFY/MAX MODE be used.
Plasmacluster ON/OFF Button/
Indicator Light (green)
Fan Speed Button/
Indicator Light (green)
Power ON Button
Press any of the buttons to se-
lect mode and start the unit.
Clean Air & Humidify MODE Button/
Indicator Light (green)
Clean Air MODE Button/
Indicator Light (green)
E-8
Power OFF Button
CLEAN ION SHOWER MODE Button/
Indicator Light (blue)
Humidity
Temperature
~18ºC 65%
18ºC~24ºC 60%
24ºC~ 55%