Table of Contents
Advertisement
GB
6. General precautions
S
Make sure the return cable is connected securely.
S
Work on high voltage equipment may only be carried out by a qualified
electrician.
S
Appropriate fire extinquishing equipment must be clearly marked and close
at hand.
S
Lubrication and maintenance must not be carried out on the equipment
during operation.
Mind the following:
S
That the freewheel clutch of the gear shall be in locked position.
S
That, if the operator leaves the machine, it shall be parked with blocks in
front of the wheels, in order to prevent the machine from moving
unintentionally.
S
Make sure that the automatic welding machine is not unstable before start.
S
That the placement of the welding head and the wire reel influence the
centre of gravity of the machine.
Too high a centre of gravity means an unstable welding machine.
S
That the consumption of wire and flux results in displacement of the weight
distribution during the welding.
WARNING, RISK OF CRUSHING!
Do not use safety gloves when replacing wire, feed rollers and wire bobbins.
SafeArcT GB
- 6 -
Advertisement
Table of Contents
