Table of Contents
Advertisement
32
www.aeg.com
Top lamp
Step 1
Step 2
Step 3
Step 4
12. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
12.1 What to do if...
In any cases not included in this table
please contact with an Authorised
Service Centre.
Problem
The oven does not
heat up.
The display shows
"12.00".
The water leaks out
of the cavity em‐
bossment.
We recommend that you write the data here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
Turn the glass cover to remove
it.
Clean the glass cover.
Replace the lamp with a suitable 300 °C heat-resistant lamp.
Install the glass cover.
Check if...
The fuse is blown.
There was a power
cut. Set the time of
day.
There is too much
water in the cavity
embossment.
Problem
Unsatisfying cook‐
ing performance of
the function: True
Fan Cooking
PLUS .
The lamp does not
work.
12.2 Service data
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre.
The necessary data for the service
centre is on the rating plate. The rating
plate is on the front frame of the oven
cavity. Do not remove the rating plate
from the oven cavity.
.........................................
.........................................
.........................................
Check if...
You filled the cavity
embossment with
water.
The lamp is burnt
out.
Advertisement
Table of Contents
