Installing The Inner Rails On The Chassis - Supermicro SC846B JBOD User Manual

SC846B JBOD Chassis Manual

Installing the Inner Rails on the Chassis

Installing the Inner Rails
1. Identify the left and right side inner rails. Place the correct inner rail on the side
of the chassis, aligning the hooks of the chassis with the inner rail holes. Make
sure the rail faces "outward" so that it will fit with the rack's mounting bracket.
2. Slide the rail toward the front of the chassis to hook the inner rail onto the side
of the chassis.
3. If desired, secure the rail with two flat head M4 x 4mm screws as illustrated.
4. Repeat for the other inner rail.
Figure 5-3. Installing the Inner Rails
5-6
Inner Rails