Chassis Setup and Maintenance
4-1
Overview
This chapter covers the steps required to install components and perform
maintenance on the chassis. The only tool required is a Phillips screwdriver.
Review the warnings and precautions listed in the manual before setting up or
servicing this chassis. These include information in Chapter 2: Warning Statements
for AC Systems and the warning/precautions listed in the setup instructions.
Control Panel
Chapter 4: Chassis Setup and Maintenance
Chapter 4
Figure 4-1. Front View
Figure 4-2. Rear View
(E2C model shown)
4-1
SAS
BMC
LAN