Starting Cold Engine - Echo HCS-2810 Operator's Manual

Hide thumbs Also See for HCS-2810:
Table of Contents

Advertisement

OPERATION

Starting Cold Engine

Hedge Trimmer blades are very sharp. Touching them may lead
to severe personal injury. Avoid touching blades whenever
possible, and always wear gloves to protect hands.
Note: The blade cover is used for transportation and storage.
Remove blade cover before using the unit.
1.
Stop Switch
Move stop switch (A) away from
the STOP position.
2.
Choke
Move choke (B) to COLD
START (
) (CLOSED)
position.
3.
Purge Bulb
Pump purge bulb (C) until fuel is
visible and flows freely in the
clear fuel tank return line. Pump
bulb an additional 4 or 5 times.
4.
Recoil Starter
Lay the unit on a flat, clear area.
Grip the support handle (D)
securely with right hand, and
pull the recoil starter handle (E)
with left hand until engine fires
(or 5 pulls maximum).
20
HCS-2810 / 3810
A
C C
B
E
© 10/21 ECHO Incorporated
D
X7702248301

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hcs-3810

Table of Contents