Table of Contents
Advertisement
HCS-2810 / 3810
Cooling System
Level 2.
To maintain proper engine operating temperatures, cooling air must
pass freely through the cylinder fin area. This flow of air carries
combustion heat away from the engine.
Overheating and engine seizure can occur when:
• Air intakes are blocked, preventing cooling air from reaching the cylinder.
• Dust and grass build up on the
outside of the cylinder. This build
up insulates the engine and
prevents the heat from leaving.
Removal of cooling passage
blockages or cleaning of cooling fins
is considered "Normal
Maintenance." Any failure attributed
to lack of maintenance is not
warranted.
1.
Remove spark plug lead.
2.
Remove muffler cover.
3.
Remove engine cover.
4.
Remove starter cover and
clean dirt and dust from fins.
DO NOT use a metal scraper to remove dirt from the cylinder fins.
5.
Assemble components in reverse order.
X7702248301
© 10/21 ECHO Incorporated
MAINTENANCE
29
Advertisement
Table of Contents
