Operation; Starting Cold Engine - Echo 02999999 Operator's Manual

26
O
PERATION
• Provide all operators of this equipment with the Operator's Manual,
and instructions for safe operation.
• Refer to the Safety Manual provided with the unit for proper
trimming and brush cutting techniques.
• During operation, the exhaust area, and the bearing housing may
become very hot. Avoid contact during and immediately after
operation. Always keep the exhaust area clear of flammable debris.
Allow the engine and muffler to completely cool before performing
any maintenance activity.

STARTING COLD ENGINE

WARNING
The cutting attachment should not rotate at idle. If attachment
rotates, readjust carburetor according to "Carburetor Adjustment"
instructions in this manual or see your ECHO Dealer, otherwise
serious personal injury may result.
1. Stop Switch - Start/Run.
Move stop switch button (A) forward away from the STOP
position.
2. Close Choke - Cold Start.
Move choke lever (B) to Cold Start Position.
3. Primer - Pump Bulb.
Pump primer bulb (C) until fuel is visible and flows freely in the
clear fuel tank return line. Pump bulb an additional 4 or 5 times.
DANGER
A
B
C