Stopping Engine - Echo HCS-2810 Operator's Manual

HCS-2810 / 3810
3. Recoil Starter
Place the unit on a flat, clear
area. Grip the support handle
(D) securely with right hand,
and pull the recoil starter handle
(E) with left hand until engine
fires.
Note: If engine does not start
after 5 pulls, use Cold
Start Procedure.

Stopping Engine

1. Throttle
Release throttle and allow
engine to return to idle before
shutting off engine.
2. Stop Switch
Move stop switch (A) to STOP
position.
If engine does not stop when stop switch is moved to STOP
position, close choke - COLD START position - to stall engine.
Have your dealer repair stop switch before using unit again.
X7702248301
© 10/21 ECHO Incorporated
OPERATION
E
A
D
23