Table of Contents
Advertisement
OPERATION
Starting Warm Engine
The starting procedure is the same as Cold Start except DO NOT close the
choke.
The blades must not move at idle, otherwise serious personal
injury may result. Periodic carburetor adjustment may be
necessary to assure blades do not move at idle. If blades move,
readjust carburetor according to "Carburetor Adjustment"
instructions in this manual or see your Dealer.
1.
Stop Switch
Move stop switch (A) away from
the STOP position.
2.
Purge Bulb
Pump purge bulb (C) until fuel is
visible and flows freely in the
clear fuel tank return line. Pump
bulb an additional 4 or 5 times.
22
HCS-2810 / 3810
A
C C
© 10/21 ECHO Incorporated
X7702248301
Advertisement
Table of Contents
