Environment; Troubleshooting; Replacing The Lamp - Philips HF3485/01 Manual

Philips wake-up light hf3485/01 usb playback and dusk simulation
Hide thumbs Also See for HF3485/01:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
EnglisH
14
For more information, visit our website www.philips.com.

replacing the lamp

1
Unplug the appliance before you replace the lamp.
2
If the lamp is still hot, let it cool down for approx. 15 minutes.
3
To unlock the top cover, press it and turn it anticlockwise until the O symbol on the top
cover is aligned with the 1 symbol on the lamp housing. (Fig. 36)
4
Remove the top cover. (Fig. 37)
5
Remove the old lamp from the lamp holder (Fig. 38).
6
Insert the pins of the new lamp into the lamp holder. (Fig. 39)
Do not touch the lamp with your fingers. Use a cloth or paper towel when you place
the lamp (Fig. 40).
7
Place the top cover back onto the appliance.
8
Lock the top cover by turning it clockwise until the 1 symbol on the top cover and the 1
symbol on the lamp housing are aligned. (Fig. 41)

Environment

-
Do not throw away the appliance with the normal household waste at the end of its life, but
hand it in at an official collection point for recycling. By doing this, you help to preserve the
environment (Fig. 42).
guarantee and service
If you need service or information or if you have a problem, please visit the Philips website at
www.philips.com or contact the Philips Consumer Care Centre in your country (you find its phone
number in the worldwide guarantee leaflet). If there is no Consumer Care Centre in your country,
go to your local Philips dealer.

troubleshooting

This chapter summarises the most common problems you could encounter with the appliance. If
you are unable to solve the problem with the information below, contact the Consumer Care
Centre in your country.
Problem
The appliance does not
work at all.
The appliance functions
properly, but the lamp
does not work
anymore.
The appliance becomes
hot during use.
Solution
Perhaps the plug is not inserted properly in the wall socket. Put the plug
properly in the wall socket.
Perhaps there is a power failure. Check if the power supply works by
connecting another appliance.
Perhaps the lamp has reached the end of its life. The life depends on
how you use the appliance. In case of heavy use, the lamp may not last
as long as you expect. If the lamp breaks down, you can order a new
one or buy it at your local retailer. Contact the Philips Consumer Care
Centre in your country.
This is normal, as the appliance is heated up by the light of the lamp and
the electronics. Always let the appliance cool down before you replace
the lamp.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hf3485/60Hf3485

Table of Contents