Qsan XCubeNAS XN3000T Owner's Manual page 17

② Place the drive on the tray and clip-in both brackets to tighten the disk drive to the
tray.
3. Install a 2.5'' SSD into a LFF tray.
① Only remove the bracket next to the 2.5" screw holes (they are marked on the
bottom of the tray).
② Place the drive in the blue area (shown below) of the tray.
③ Turn the tray upside down and secure the drive from the bottom of the tray with four
screws provided in the accessory box.
11