Hdd Disassembly - EBN Technology XPOS75-5B-2930 Service Manual

4.

HDD Disassembly

1. Loosen the four screws by #1 Phillips screwdriver as shown below and remove the
HDD assembly from the device.
2. Unplug one connector of the SATA cable and power cable from the HDD.
3. Loosen the four screws fixing the HDD and remove the HDD from the bracket as
shown below.
4. Install the new HDD in the reverse procedure from Step 4 to Step 1.
4
4.
Chapter 4