FOOTREST HEIGHT ADJUSTMENT
1. Remove front body shroud by lifting it up and off of the power chair base.
2. Use a 10mm socket and 4mm Allen wrench to remove the bolts indicated in figure 22.
3. Slide the footrest to the desired height.
4. Align the bolt holes in the footrest and the footrest bracket.
5. Install and tighten the bolts.
Joystick Bracket Length Adjustment
1. Loosen the adjustment knob. See Figure 23.
2. Slide the joystick holder in or out to the desired position.
3. Tighten the adjustment knob.
VI. COMFORT SETTINGS
Height Adjust Bolts
(4mm Allen)
Figure 22
Figure 23
23
Nuts (10mm)