Golden Alante GP205 Owner's Manual page 14

Front wheel drive power chair
Table of Contents

Advertisement

Seat Installation
1. Fold the seat back down.
2. Grasp the seat firmly on each side, lift the seat and align the seat pin with the hole in
the seat post receiver. See figure 6.
3. Insert the seat into the seat post.
4. Push down on the seat to lock into place. Move the seat from side to side to make sure
it is locked into place.
To rotate your seat, push down on the seat rotation lever and rotate the
seat to the desired position. Release the handle to lock the seat in position.
your power chair.
Headrest Installation
1. Align the headrest with the holes in the seat back.
2. Push in on the headrest clamp and push down on the headrest to insert it into the
seat back. See figure 7.
IV. ASSEMBLY
Be sure the seat is correctly installed and locked before operating
Figure 6
Figure 7
14

Advertisement

Table of Contents
loading

Table of Contents