Table of Contents
Advertisement
www.ti.com
If a change of COM port is required, select Serial Port from the Options menu. The serial port
configuration shown in
settings. Select the desired COM port from the drop-down menu. Use the recommended baud rate setting
and click OK.
From the File drop-down menu shown in
GUI detects the LaunchPad™, the firmware is automatically programmed into the LaunchPad™. The
connect icon shown in the lower left corner of the GUI may show a line through the connect icon. The icon
with the line through it is showing that the device is connected but does not communicate using this COM
port for changing device settings or collection of data. The COM port currently selected is for device
programming only.
SBAU322 – August 2018
Submit Documentation Feedback
Figure 8
displays a drop-down menu for available COM Ports and Baud Rates
Figure 8. Serial Port Settings
Figure
Figure 9. Program the Device
Copyright © 2018, Texas Instruments Incorporated
9, select Program Device from the menu options. If the
BOOSTXL-ADS1119 BoosterPack™ User's Guide
Setup Details
11
Advertisement
Table of Contents
