Specific Safety Rules - Central Pneumatic 65903 Set Up And Operating Instructions Manual

1. CAuTiON! Prior to its
make sure to fill the Air Compressor with a premium quality, 30 weight, non-
detergent oil to the specified level. Running the Air Compressor with no oil or
with low oil will cause damage to the equipment and void its warranty. Refer to the
"Operating Instructions" section for details on filling the Air Compressor with oil.
2. When filling the Air Compressor with oil, make sure to
the Oil Fill Cap to remove.
3. use eye and ear protection.
goggles, and ear plugs when using the Air Compressor.
4. Make sure all tools and equipment used with the Air Compressor are rated to
the appropriate air pressure capacity of the Air Compressor. Do not use any
tool or equipment that does not operate from 0-115 PSI. If necessary, check the
owner's manual of the tool or equipment for its air pressure rating.
5. Always disconnect the Air Compressor from its electrical outlet, release any
remaining air pressure from the unit, and disconnect all pneumatic tools and
equipment from the unit, before performing any services or maintenance.
6. Avoid injury. Never direct the air jet at people or animals.
7. inspect safety valve daily
sure can build up to dangerous levels. The tank could explode. For this reason,
pull the ring on the safety valve before each use and verify that it operates freely.
Replace safety valve if it does not operate freely.
Never remove or alter the factory sealed Safety Release Valve.
8. do not attempt to readjust the automatic start and shutoff valves.
change to the automatic ON/OFF pressure levels will cause additional stress on
the motor, which may result in shortened motor life.
9. drain the Air Compressor's air tank every day.
up inside the Air Tank.
10. do not unscrew the tank drain valve so that
showing.
Avoid risk of tank explosion
11.
a. Avoid weakening of tank by draining condensation after each use.
b. Never modify tank by drilling holes, welding to it, or modifying it's parts.
c. The tank is designed, and factory set, to operate within a specific pressure range.
For that reason, never make adjustments to, or substitute parts, to the compres-
sor.
12. Avoid bodily injury from moving parts
without notice. For this reason, always keep hands and arms away from compres-
For technical questions, please call 1-800-444-3353.
SKU 65903

SPECiFiC SAFETY RuLES

first use, and thereafter prior to each subsequent use,
Always wear ANSI-approved safety impact eye
. If the safety valve is not working properly, tank pres-
.
unscrew (do not pull)
Do not allow moisture to build
more than four threads are
. The compressor cycles on automatically,
Any
Page 5