Central Pneumatic 65903 Set Up And Operating Instructions Manual page 8

1. CAuTiON! Prior to its first use, and thereafter prior to each subsequent
use, make sure to fill the Air Compressor with a premium quality, 30 weight,
non-detergent oil. Running the Air Compressor with no oil or low oil will cause
damage to the equipment and void its warranty.
2. When filling the Air Compressor with oil, make sure to
Fill Cap (28) to remove. (See Figure d.)
3. Once the Oil Fill Cap (28) is removed, fill the Air Compressor with a premium qual-
ity, 30 weight, non-detergent oil until the level of the oil rises to the midway point
in the Oil Level Indicator (35). Then, screw the Oil Fill Cap back onto the Oil Fill
Hole. (See Figure d.)
4. NOTE: When the Compressor is running, some oil will escape the Oil Fill Cap
bleeder; this is a normal occurance.
1. WARNiNG! Verify that installation surface has no hidden utility lines before drill-
ing or driving screws.
2. For added safety, it is recommended that the Air Compressor be mounted on a flat,
level, sturdy, concrete floor surface capable of withstanding the weight of the Air
Compressor and any additional tools and accessories.
For technical questions, please call 1-800-444-3353.
SKU 65903
To Fill The Air Compressor With Oil:
OuTLET VALVE
To Mount The Air Compressor:
OiL FiLL CAP
(28)
AiR
(4)
unscrew (do not pull) the Oil
OiL LEVEL
iNdiCATOR
(35)
FiGuRE d
REV 09b
Page 8