Specific Safety Rules - Central Pneumatic 93351 Assembly And Operating Instructions Manual

WARNING! Your Warranty is voided if:
1.
a. You do not put compressor oil in the Compressor's crankcase prior to its
first use. Before each use, check the oil level. Never run the Compressor
with low or no compressor oil. Running the Compressor with low or no
oil will permanently damage the unit.
b. You use an extension cord with the Air Compressor. Connect the Air
Compressor's Power Cord Plug directly to the nearest 120 volt, grounded,
electrical outlet. If necessary, attach a longer air hose to the Compressor.
You drop the Air Compressor. Do not lift the Air Compressor using its
c.
Handle.
This Air Compressor may require a dedicated electrical circuit, as the amper-
2.
age draw under full load combined with use of any other item may overload
your circuit.
Maintain labels and nameplates on the Air Compressor. These carry important
3.
information. If unreadable or missing, contact Harbor Freight Tools for a replace-
ment.
4. Always wear ANSI-approved safety impact eye goggles when assembling and
using the Air Compressor.
Maintain a safe working environment. Keep the work area well lit. Make sure
5.
there is adequate surrounding workspace. Always keep the work area free of ob-
structions, grease, oil, trash, and other debris.
DANGER! This Air Compressor is NOT equipped and should not be used "as is"
6.
to supply breathing quality air. For any application of air for human consumption,
you must fit the Air Compressor with suitable inline safety and alarm equipment
(not included). This additional equipment is necessary to properly filter and purify
the air to meet minimal specifications for Grade D breathing as described in Com-
pressed Gas Association Commodity Specification G 7.1-1966, OSHA 29 CFR
1910. 134, and/or Canadian Standards Associations (CSA). In the event the Air
Compressor is used for the purpose of breathing air application and proper inline
safety and alarm equipment is not simultaneously used, existing warranties are void,
and Harbor Freight Tools disclaims any liability whatsoever for any loss, personal
injury, or damage.
DANGER! Never attempt to repair or modify the Tank (50). Welding, drilling, or
7.
any other modification will weaken the Tank resulting in damage from rupture or
explosion. Always replace worn, cracked, or damaged Tanks.
For technical questions, please call 1-800-444-3353.
SKU 93351

SPECIFIC SAFETY RULES

Page 5