Reproduction Ratio - Ricoh Aficio A080 Operating Instructions Manual

User Tools (Copier / Document Server Features)
❖ ❖ ❖ ❖ Image Density
Specifies the copy image density
for each original type (Text, Draw-
ing, Text/Photo, Photo, Back-
ground Lines, Patched Original,
Generation Copy).
Note
❒ Default: Normal
❖ ❖ ❖ ❖ Change Initial Mode
You can select standard mode or
Program No.10 as the mode effec-
tive when power is turned on, or
modes are cleared.
4
Note
❒ Default: Standard
❖ ❖ ❖ ❖ Max. Copy Quantity
Specifies the maximum number of
copies that can be set.
Note
❒ Default: 99 sheets
❒ The number can be set from 1 to
99 sheets using the number
keys.
❖ ❖ ❖ ❖ Job End Call
You can choose to have the beeper
sound when copying is complete.
Note
❒ Default: On
❒ If Panel Tone of User Tools (Sys-
tem Settings) settings is [On], the
machine beeps to notify you
that it did not complete a job for
reasons such as: the paper tray
ran out of paper, or a paper mis-
f e e d o c c u r r e d . S e e " P a n e l
Tone", General Settings Guide.
86

Reproduction Ratio

❖ ❖ ❖ ❖ Custom Magnification Settings 1–3
You can store up to three repro-
duction ratios, and have them
shown on the initial display. You
can also change registered Reduce
/ Enlarge ratios.
Enter the reproduction ratio using
the number keys.
The value can be set from 25.0% to
400.0%.
Use the { { { { ·} } } } key to enter a decimal
point.
Note
❒ Default:
• Metric version:
• Settings 1: 70.7%
• Settings 2: 100%
• Settings 3: 141.4%
• Inch version: (Engineering)
• Settings 1: 64.7%
• Settings 2: 100%
• Settings 3: 129.4%
• Inch version: (Architecture)
• Settings 1: 66.7%
• Settings 2: 100%
• Settings 3: 133.3%
❖ ❖ ❖ ❖ Enlarge 1–4
You can customize available en-
largement ratios by pressing [Re-
duce / Enlarge].
Note
❒ Default:
• Metric version:
• Enlarge 1: 141.4%
• Enlarge 2: 200%
• Enlarge 3: 282.8%
• Enlarge 4: 400%