Edit - Ricoh Aficio A080 Operating Instructions Manual

• Inch version: (Engineering)
• Enlarge 1: 129.4%
• Enlarge 2: 200%
• Enlarge 3: 258.8%
• Enlarge 4: 400%
• Inch version: (Architecture)
• Enlarge 1: 133.3%
• Enlarge 2: 200%
• Enlarge 3: 266.7%
• Enlarge 4: 400%
❒ When selecting [User Enlrg. Ra-
tio], enter a ratio using the
number keys (in the range of
101.0 to 400.0%).
❖ ❖ ❖ ❖ Reduce 1–4
You can customize available re-
duction ratios by pressing [Reduce /
Enlarge].
Note
❒ Default:
• Metric version:
• Reduce 1: 25.0%
• Reduce 2: 35.4%
• Reduce 3: 50.0%
• Reduce 4: 70.7%
• Inch version: (Engineering)
• Reduce 1: 25.0%
• Reduce 2: 32.4%
• Reduce 3: 50.0%
• Reduce 4: 64.7%
• Inch version: (Architecture)
• Reduce 1: 25.0%
• Reduce 2: 33.3%
• Reduce 3: 50.0%
• Reduce 4: 66.7%
❒ When selecting [User Redc.Ra-
tio], enter a ratio using the
number keys (in the range of
25.0 to 99.9%).
Settings You Can Change with User Tools
❖ ❖ ❖ ❖ Priority Setting : Reduce / Enlarge
You can set the ratio with priority
when [Reduce / Enlarge] is pressed.
Note
❒ Default: 100%
❒ The values you set in Enlarge 1–
4 and Reduce 1–4 can be select-
ed here.
❖ ❖ ❖ ❖ User Auto R/E
Specifies original and copy sizes
displayed when [User Auto R/E] is
pressed. See p.34 "User Auto Re-
duce/Enlarge".
Select the copy size to use with the
original size.

Edit

❖ ❖ ❖ ❖ Adjust Position
Specifies the default setting for
Print Position Adjustment. See
p.61 "Adjust Print Position".
Note
❒ Default:
• Metric version: Bottom: 20 mm/
Right: 20 mm
• Inch version: Bottom: 0.8"/
Right: 0.8"
❒ You can adjust the position with-
in the following range:
• Metric version: 0– 200 mm
(1 mm increments)
• Inch version: 0– 7.8" (0.1" in-
crements)
4
87