Connection Mode - FujiFilm X-T30 New Features Manual

X-T30 Owner's Manual:

CONNECTION MODE

Adjust settings for connection to external devices.
Option Option
USB CARD READER
X WEBCAM
*
SHOOTING AUTO
USB MOVIE
*
SHOOTING FIXED
USB RAW CONV./
BACKUP RESTORE
* Rotate the drive dial to F (movie).
8
P
218
Connecting the camera to a computer via USB automatical-
ly enables data transfer mode, allowing data to be copied
to the computer. The camera functions normally when not
connected.
The camera can be used as a webcam when connected to a
computer running FUJIFILM X Webcam.
The camera's movie-recording features can be controlled
from gimbals, drones, or other devices connected via USB.
The camera automatically enters "tethered shooting" (i.e., re-
mote-control) mode when the external device is turned on
and returns to normal operation when the external device
turned off or disconnected. The features available vary with
the type of device connected.
As for USB MOVIE SHOOTING AUTO, except that the
camera remains in "tethered shooting" (remote-control)
mode when the external device is off or not connected, al-
lowing the device to resume control when the connection
is re-established after an accidental disconnection or other
disruption.
Connecting the camera to a computer via USB automatical-
ly enables USB RAW conversion/backup restore mode. The
camera functions normally when not connected.
• USB RAW CONV. (requires FUJIFILM X RAW STUDIO): Use the
camera's image processing engine to rapidly convert RAW
fi les to high-quality JPEG images.
BACKUP RESTORE (requires FUJIFILM X Acquire): Save and load
•
camera settings. Reconfi gure the camera in an instant or
share settings with other cameras of the same type.
Description Description
Ver. 1.40